Products

The electromechanic actuator Techno is designed for residential gates up to 5 meters long per leaf in 3 different versions. 230V, 110V and 24Vdc models available.

• motor made from die-cast aluminium coated with epoxide painting
• bronze gear
• easy to use release system
• total irreversibility, non need for electric lock
• complete with fixing brackets (to be welded or bolted)

The electromechanic linear actuator Stilo has been designed for swing gates with leaf up to 3 m. Available in different models to fit residencial gates of variuous lenghts. The same actuator can be installed on both right or left leaf, to make the management of the stock easier to handle. Available in 230 V, 110 V and 24 Vdc.

• motor made from die-cast aluminium coated with epoxide painting
• bronze gear
• effective and easy to use release system with lock and personalised key
• total irreversibility, non need for electric lock

The electromechanic underground operator Hide New is ideal for swing gates with leaf up to 3 m. Available in 230 V, 110 V and 24 Vdc.

• maximum opening angle 180° (by installing a specific device)
• galvanised or stainless steel foundation case
• watertight case
• reduced dimensions of the motor, the gate appearance is not altered
• no modification on the pillar nor on the structure is required

The electromechanic actuator Energy is ideal for swing gates in case of installation with wide pillar dimensions and leaf up to 2,5 m. This motor can be installed in a variety of situations and can open up to 130°. Available in 230 V, 110 V and 24 Vdc.

• easy to install
• limit switches incorporated
• built-in control unit (in 230v and 110v version)
• cover in ABS, weatherproof
• optional opening toward outside up to 130°

Compass, a gear motor for swing gates, is higtly innovative in its concept. Its installation is extremely easy and thanks to a sliding guide it's perfect for steep surfaces

• maximum inclination of 12° with 20cm of difference in level
• specifically studied for gates with leaves up to 150kg without limits of opening angle
• high quality materilas used: steel, bronze, aluminium, ABS for the carter
• available in blocked or reversible version

The electromechanic gear motor Laser has been designed to automate gates up to 1500Kg. 230V, 110V and 24Vdc models available.

• base in aluminium coated with epoxide painting, weatherproof carter in ABS
• internal housing for the control unit
• mechanical limit switches
• easy to use release system
• reduced dimension of the motor
• silent running
• easy to install thanks to adjustable fixing brackets

The gear motor Liftup has been designed to automate any kind of sectional and spring balanced garage doors.

• available in 2 versions with force of traction up to 700N and 1100N
• built-in control unit and radio receiver
• soft start and soft stop, input for photocells and push button
• built-in courtesy light and door left open alert

The gear motor Robot has been designed to automate any kind of spring or counterweight doors.

• available in 2 versions with force of traction up to 600N and 800N
• built-in control unit
• radio receiver
• built-in courtesy light
• deceleration before closing

The gear motor Balance is suitable for the automation of any kind of counterweight up-and-over doors with a surface up to 9m².

• motors and levers are of reduced dimensions
• easy to install
• built-in control unit
• the release system can be activated either from inside or outside

Motor gear for shutter doors with balancing springs, maximum weight 150kg.

• perfect reversibility which allows the manual opening of the rolling shutter
• equipped for the installation of the electromagnetic brake to make the motor irreversible if necessary
• the release system can be activated either  inside or outside